SC 200 / SC 400

High-strength prestressing container made by the stripwinding technique. The inner core of the stripwinding container is of hardened tool steel, and the steel strip material can withstand up to 200° C for the SC 200 and up to 400° C for the SC 400. The outer steel ring is assembled to the stripwound section by heat shrinkage.

The SC 200 and SC 400 containers have about double strength compared to a standard die compression rings (i.e. single and double rings) and offer a unique capability to optimize the radial prestressing of the precision forging die while remaining in a fully elastic state. This unique product feature offers two important merits: Higher service life of the forming die, and a prestressing forging tool that can be reused numerous times at full capacity. Specific calculations are required in each case.

The SC 200 container is mostly applied for precision cold forging and comparable cold work applications involving high or even extreme tool loads.

The SC 400 container is mostly applied for precision warm forging and comparable heated applications involving high or even extreme tool loads.

The SC 200 and SC 400 can both be used as radial prestressing forging tools on all types of press machines. Minimum diameter of both containers can be approx. ø50 mm.


 Catalog - SC 200 / SC 400


Prestressing containers SC200 and SC400 made by stripwinding for radial prestressing of dies
See more
STRECON Prestressing Tool System H-Type for horizontal presses

PTS - Prestressing Tool System / H-Type

STRECON Prestressing Tool System V-Type for vertical press machines

PTS - Prestressing Tool System / V-Type

STRECON stripwound containers SC 200+ and SC 400+ for radial prestressing

SC 200+ / SC 400+ | E+ Container Type

STRECON SC AXI-FIT stripwound container system for radial and axial prestressing of forming dies for cold and warm forming applications

SC AXI-FIT

STRECON compression ring of two or three rings designed for radial prestressing of forming dies

Double Ring

Prestressing tool solution designed specifically for a customer's press equipment

Customized Tool Solutions


Copyright 2023 STRECON A/S, All rights reserved